— Our Roofing Profiles —
The tile roof profile is the latest addition to the Company roofing range which is neat and aesthetic giving a streamlined and attractive perspective to any building. The tile profile is ideal for gable roofs of dwelling houses, hotels and any commercial building requiring an elegant finish.
The tile roof profile is the latest addition to the Company roofing range which is neat and aesthetic giving a streamlined and attractive perspective to any building. The tile profile is ideal for gable roofs of dwelling houses, hotels and any commercial building requiring an elegant finish.
Our range of curved sheets consist of four curvings. These sheets are recommended for walk ways, weather sheds, car park, bus stop and a variety of commercial, industrial and domestic applications. The curve sheets also contribute to cost saving due to lesser supporting frame work for fascias, roofs.
This profile with dome shaped ridges double fluted on sides of ridge and a single flute on valley, enhances the strength of the roofing and is also applicable for purposes of cladding.
The fasteners/roofing screws selected for roofing and cladding material should have similar life expectancy to that of the roofing /cladding.
We supply a special galvanized delta coated screw with rubber washer for both steel and timber frames.
Recommended screws spec - 55 mm delta coated screw.
| Base metal thickness (mm) | Total coated thickness (mm) | Mass/area kg/m² | Effective sheet cover width (mm) | Nominal sheet depth (mm) | Minimum recommended roof slope | Maximum recommended supports spacing for normal conditions |
|---|---|---|---|---|---|---|
| 0.35 | 0.40 | 3.791 | 762 | 24 | 4° |
Roofs : Internal span – 1700 mm End span – 1000 mm |
| 0.42 | 0.47 | 4.455 | 762 | 24 | 4° |
Walls : Internal span – 2400 mm End span – 1200 mm |
The U250 profile is a simple square, roll formed with a single flute on the valley of the roofing sheet, which can also be used for decking.
Recommended screw spec – 65 mm delta coated screw
| Base metal thickness (mm) | Total coated thickness (mm) | Mass/area kg/m² | Effective sheet cover width (mm) | Nominal sheet depth (mm) | Minimum recommended roof slope | Maximum recommended supports spacing for normal conditions |
|---|---|---|---|---|---|---|
| 0.35 | 0.40 | 4.316 | 665 | 39 | 2° |
Roofs : Internal span – 2000 mm End span – 1200 mm |
| 0.42 | 0.47 | 5.071 |
Walls : Internal span – 2800 mm End span – 1700 mm |
The tile roof profile is the latest addition to the Company’s roofing range which is neat and aesthetic, giving a streamlined and attractive perspective to any building. The tile profile is ideal for gable roofs of dwelling houses, hotels and any commercial building requiring an elegant finish.
The tile profile is available in six tile sizes in accordance with the tile length – varying from 8 to 16 inches. The roof support spacing will vary, depending on the tile size.
Recommended fasteners:
Steel frames – 65mm delta coated screws
Timber frames – 68mm delta coated screws
| Tile length | Base metal thickness | Total coated thickness (TCT) | Mass kg/m² | Nominal sheet depth | Recommended roof slope | Recommended support spacing | Roof spans End span | |
|---|---|---|---|---|---|---|---|---|
| Inches | mm | mm | kg/m² | mm | ° | mm | End span mm | Internal span mm |
| 8" | 0.42 | 0.47 | 5.197 | 40 | 15° | 204 mm – Minimum | 610 | 204 |
| 8" | 0.35 | 0.40 | 4.423 | 40 | 15° | 610 mm – Maximum | 610 | 204 |
| 8" | 0.30 | 0.35 | 3.87 | 40 | 15° | 204 mm – Minimum | 610 | 204 |
| 8" | 0.30 | 0.35 | 3.87 | 40 | 15° | 610 mm – Minimum | 610 | 204 |
| 9" | 0.42 | 0.47 | 5.084 | 40 | 15° | 229 mm – Minimum | 686 | 229 |
| 9" | 0.35 | 0.40 | 4.323 | 40 | 15° | 686 mm – Maximum | 686 | 229 |
| 9" | 0.30 | 0.35 | 3.784 | 40 | 15° | 229 mm – Minimum | 457 | 229 |
| 10" | 0.42 | 0.47 | 5.084 | 40 | 15° | 254 mm – Minimum | 762 | 254 |
| 10" | 0.35 | 0.40 | 4.323 | 40 | 15° | 762 mm – Maximum | 762 | 254 |
| 10" | 0.30 | 0.35 | 3.784 | 40 | 15° | 254 mm – Minimum | 508 | 254 |
| 11" | 0.42 | 0.47 | 5.084 | 40 | 15° | 254 mm – Minimum | 837 | 279 |
| 11" | 0.35 | 0.40 | 4.323 | 40 | 15° | 762 mm – Maximum | 837 | 279 |
| 11" | 0.30 | 0.35 | 3.784 | 40 | 15° | 254 mm – Minimum | 558 | 279 |
| 12" | 0.42 | 0.47 | 4.893 | 40 | 15° | 254 mm – Minimum | 610 | 305 |
| 12" | 0.35 | 0.40 | 4.164 | 40 | 15° | 508 mm – Maximum | 610 | 305 |
| 12" | 0.30 | 0.35 | 3.65 | 40 | 15° | 254 mm – Minimum | 610 | 305 |
