Randek Tile Roofing

The tile roof profile is the latest addition to the Company’s roofing range which is neat and aesthetic, giving a streamlined and attractive perspective to any building. The tile profile is ideal for gable roofs of dwelling houses, hotels and any commercial building requiring an elegant finish.

The tile profile is available in six tile sizes in accordance with the tile length – varying from 8 to 16 inches. The roof support spacing will vary, depending on the tile size.

Product specifications

Feeding width:	914 mm
Effective cover width (EW):	730 mm
Rib height:	40 mm
Tensile strength:	G550 (Hi-ten) G350 (soft)
Coating class:	AZ 150
Recommended total coated thickness:	0.47mm, 0.40mm and 0.35mm .
Standard tile length (6 sizes):	8”, 9 “, 10” ,12 “,14 “ and 16” (inches). Orders for customized tile lengths are also accepted
Colour range:	Colourbonded steel

Profile diagram Specifications summary `RANDEK’ Tile roofing (in mm)

Tile length	Base metal thickness	Total coated thickness (TCT)	Mass per Area	Nominal sheet depth	Recommended minimum roof slope	Recommended support spacing	Roof spans
inches	mm	mm	kg/m²	mm	°	mm	Internal span mm	End span mm
8”	0.42	0.47	5.197	40	15º	204 mm - Minimum	610	204
8”	0.35	0.40	4.423	40	15º	610 mm - Maximum	610	204
8”	0.30	0.35	3.87	40	15º	204 mm - Minimum	610	204
8”	0.30	0.35	3.87	40	15º	610 mm - Maximum	610	204
9”	0.42	0.47	5.08	40	15º	229 mm - Minimum	686	229
9”	0.35	0.40	4.323	40	15º	686 mm - Maximum	686	229
9”	0.30	0.35	3.784	40	15º	229 mm - Minimum	457	229
9”	0.30	0.35	3.784	40	15º	457 mm - Maximum	457	229
10”	0.42	0.47	5.08	40	15º	254 mm - Minimum	762	254
10”	0.35	0.40	4.323	40	15º	762 mm - Maximum	762	254
10”	0.30	0.35	3.784	40	15º	254 mm - Minimum	508	254
10”	0.30	0.35	3.784	40	15º	508 mm - Maximum	508	254
11”	0.42	0.47	5.08	40	15º	254 mm - Minimum	837	279
11”	0.35	0.40	4.323	40	15º	762 mm - Maximum	837	279
11”	0.30	0.35	3.784	40	15º	254 mm - Minimum	558	279
11”	0.30	0.35	3.784	40	15º	508 mm - Maximum	558	279
12”	0.42	0.47	4.893	40	15º	254 mm - Minimum	610	305
12”	0.35	0.40	4.164	40	15º	508 mm - Maximum	610	305
12”	0.30	0.35	3.65	40	15º	254 mm - Minimum	610	305
12”	0.30	0.35	3.65	40	15º	508 mm - Maximum	610	305

Fasteners / screws complementing the roofing / cladding range

Recommended fasteners:

Steel frames - 65mm delta coated screws

Timber frames - 68mm delta coated screws